Most fabrication shops, EPC contractors and third-party inspection agencies in Chennai ask for NDT Level II inspectors. Freshers often ask whether they should take Level I first, or go directly to Level II. Here is how the system works.
What the levels mean
Under the ASNT recommended practice SNT-TC-1A, an employer certifies its own NDT personnel according to a written practice. A Level I person can perform specific calibrations and tests under supervision and record results. A Level II person can set up and calibrate equipment, perform the test, interpret and evaluate results against codes such as ASME Section V and VIII, and write reports. A Level III person writes procedures and the written practice itself.
Under ISO 9712, certification is issued by an independent certification body rather than the employer. Many Indian companies working on export orders now ask for ISO 9712 alongside SNT-TC-1A.
Training hours and experience
Each method has recommended minimum training hours and on-the-job experience. Penetrant and magnetic particle testing need the least; ultrasonic and radiography need the most. That is why our UT and RT courses run 10 days each while DPT and MPT run 3 days.
Our recommendation
- Freshers: take combined Level I & II training in PT and MT first, then UT. Build documented experience while working.
- QC engineers: go for UT Level II and RT film interpretation, which are the most requested in job descriptions.
- Experienced UT technicians: PAUT and TOFD give the biggest jump in pay and project opportunities.
Whichever path you choose, insist on practical sessions on real weld specimens with known defects. Employers test you on the job, not on theory alone.